My bike has been leaking hydraulic fluid from the master cylinder, I originally thought it was leaking from the seal on the cap (because there was crustied brake fluid on it which could impede the seal), but i scraped it off and it still leaked, I had failed to cinch on the screws so it leaked more on my bike, I just pulled off the clutch and the boot shown as #18 is torn. #14 and #15 are the primary/secondary cup, if the brake fluid is leaking out 18, both the cups are faulty correct? in which case I need to replace 14/15/18?
I've go tthe bike sitting outside with paper towels under the bowl to help track down the source of the leak right now.
And yes, I know that the brake fluid eats paint...I need to repaint my gas tank/front fairing...Also what is the easiest way to clean the system, as there is crud in the filler cup, and I've already went through a liter of brake fluid by filing up the bowl and pumping it out the bleeder valver?
Any help is appreciated.