Help me figure out how to mount my R6 mini tail?
Hi Guys, so I got a new body for my bike. I got it ridiculously cheap - from seller Brandacat on Ebay ($270 plus shipping, which was 4 days). Fits up great, only thing I had to do is deburr some holes and make a few a touch larger. So the pics here were partway through mounting...I also have a newly painted tank to install, and the hugger and frame inserts etc...
So anyhow on to my prob.
I also bought, from a different source, a mini tail for the rear. This is shorter than a standard undertail, they just replace the mudflap area...
Now in the pic my tail section is just sitting on, not mounted, but I wanted to show u what I am up against. The previous owner already hacked the mudflap, I just removed the signals today.
Like ok. Where the F*7K am I supposed to cut this to make it work? It looks like I have to take the entire bottom mount off under the tail light. I started one cut, changed my mind, and started another. Then I stopped before I majorly screw something up.
Yes, I contacted the maker and they would not supply any help.
First is supplier pic (bad pic, but you get the idea..)
Oh here is my bike to reference what I am talking about.
Last edited by Fawn; 03-01-2009 at 05:18 PM.
I don't do PM's
Ok I have looked at quite a few pics, I think this is a totally different shaped tail light than stock, and that I am going to have to make the undertail and tail fit first, and them remount the tail light to enable it to fit within the two. If anyone has other ideas feel free to let me know.
**edit, ok I figured it out. The light I have is from a specific undertail for 2001-2002 only. So I decided to buy the full undertail, and get rid of the mini tail and the tail light, too much hassle. And I want it to look perdy.
Last edited by Fawn; 03-01-2009 at 06:50 PM.
I don't do PM's