so I just put new 2ct's on my 929 and I now have 1000kms on the new set. I have noticed some strange wear developing and thought that someone here might have run into before.
My previous set of tire were 2ct as well (thou a 190/50 before, now a 190/55)
and I didn't have any issues.
I have attached three photos, one shows how the edge of the tread grooves are wearing (maybe normal, I don't remember) but seems wierd considering the direction the wheel is spinning. The second is a big tear down the middle of the tire. Is it possible that something got wedged between the swing arm and the tire and did this?
another shows the profile with a peak near the shoulder of the tire (same on both sides).
I usually run 42psi, as per my manual. I checked the tire cold and it was 39.
Any insight would be helpful.