hey i have a 2000 r6 and bought a GIpro gear indicator and went to install it

i have the harness in to the speed sensor coupler and the red wire to the rear brake light for 12V now the green and black wire says to go to the camshaft position sensor and its either a clear or black coupling with a grey wire and a black/blue wire well i found the sensor but its a green/red and a black/blue wire i know its the right coupler because if i disconnect it and fire up the bike the tach doesnt work....
now the black/blue wire has the power reading coming out of it i tried tapping into both lines and cant get the unit to 'L' Learn nuetral

HELP please and thanks