so my rpms seem high. my bike shows 12500 - 15000 red, then looks like it would hit 17000 if it had it since the needle gets burried. in sixth gear down the hwy going 100km/h i believe my rpm is around 11000. so i speed up and 130km or so the rpm needle is in the red maybe 13500. so at about 160km the needle is burried past 15000. the speedometer tops out 280, i read about the bikes and clearly see that it should be at least 240 260km/h.
the bike has ram built airflow from nose cone, i guess for the top end. liquid cooled rad in front. sounds like im almost over eving at about 160. not sure though.