so i am planning my first valve adjustments on my drz400 in a few weeks.
got all the tools, just waiting for 3 plastic washers and a new bucket for a spare.
my manual says intake 0.10-0.20mm (0.004-0.008 in.)
exhuast 0.20-0.30mm (0.008-0.0012 in.)
When Orca Bay was still open. The service manager said to keep intake tight and exhaust loose.
Ill be using in. not mm for my measurements. would setting intake at 0.005 and setting exhaust at 0.0011 a good measurement to set them at?