CBR 125 fender re-eliminator
I've got my first bike a month ago, and unknowingly got the '08 CBR 125 with fender eliminated. The guy put lighting strips instead of stock rear turning lights, and they are adjacent to the tail, parallel to the stop lights. These are very hard to see in the daylight, and I want to change the lights to stock-ish ones (safety first).
I've ordered 2 lights off ebay (http://www.ebay.ca/itm/330946601091?...84.m1497.l2649) to replace (or add?) to the ones I have now, but I can't think of a way to add them to the existing assembly. Is there a part that is like the stock fender but does not weigh that much, and is smaller?
Sorry if the post is out of place, didn't mean to flood.
May be easier to simply buy the stock assembly. Everything else will simply
be jury rigged, and nobody can really offer solid advice without detailed images
of the entire setup. If you feel the need to show off that skinny lil rear tire,
just get a stock assembly, and cut it down shorter with a dremel or hacksaw.
If you want to keep what you have, as you've bought lights without knowing
what to do with them, simply get a piece of steel, bend two 90's on each end,
drill holes for lights, rattle can it black, and screw it into the bottom of the
eliminator. Like the bottom piece of this eliminator:
Took me long enough, but here they are
Can't upoad them to the forum for some reason so here is the external host
Last edited by ninjah; 10-01-2013 at 07:07 PM.
This actually looks exactly like something I imagined would be a perfect option. Thank you for the advice!
Originally Posted by CHIA
Tags for this Thread