After trying a couple of throttle locks that wouldn't fit and refusing to pay a couple of hundred bucks for a throttle miester that makes you move your hand on the bars I found this on a forum and tried it and it works great!
Prop up the tank and look at the linkage on the right side of the throttle bodies while moving your fast idle (choke) lever....you'll see that it's simply a cam that opens the throttle..
See the tab on the cam that rests against the stop screw? Take a pair of needle nose pliers and bend that fucker to the left as far as you can.... now adjust the cable so you have a teeny bit of gap between the cam and the pin on the injector linkage and your bike will loaf along at 140k all day as you pick your nose...
Because it's a cam, it's incredibly adjustable , just don't forget and give the lever full twist when you start the bike..
BTW if you do this and crash......your a dumb fuck and I'll delete this thread and deny everything