Replacing a Stator and Rectifier Regulator
Hey all, just bought a 2001 Gsxr 750, gotta put a stator and a rectifier regulator on the bike, do to...unfortunate malfunctions...*ahem*
But, i have no idea what to do, as this is my first sport bike. Any help with directions would be appreciated, i have a general idea of what to do, but specifics would be more then helpful. Cheers
The best way??
Go by a Clymer manual at a shop that way you can not only fix what you need but anything in the future as well.
make sure to use locktight on the stator bolts and torque them,as well use a new gasket if the old one is torn and make sure to use some oil resistant silicone were the stator wires come out of the case as well as behind the rubber piece that mates the 2. put a small dab on the engine block were the 2 cases are split you can arely see them.
Go and buy a BFH and your problem is fixed...
Originally Posted by Efox
Good luck with the fix, you have the stator now its time to test your skillz