replacing fork oil and seals
Results 1 to 2 of 2

Thread: replacing fork oil and seals

  1. #1
    Join Date
    Jul 2003
    95 Ninja ZX600C

    replacing fork oil and seals

    i have a 95 ZX600C and i'm wanting to replace the fork oil and seals. i came across a manual to find out how to do it, but that manual says i should have fork oil bleed valves but on the forks i have, no valve whatsoever. just wondering if forks fall into certain generalities where someone can tell me how to go about replacing the oil and seals? i've attached a schematic, if that helps...thanks a lot!

  2. Remove Advertisements

  3. #2
    Registered User Array HSC's Avatar
    Join Date
    Jan 2005
    north van
    need to re-up
    before you drain it do you know how many cc's of fresh oil you have to put in them ? do you have a fork seal driver for them ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts