im havin some trouble with the clutch in my s-15, i ran the resevoir dry (oops) and the clutch went away completely. i filled the resevoir back up and had a bit of clutch, but it squeals really loud when i press the clutch pedal. I replaced the master cylinder, because it had leaked a little inside and i figured that running it dry finished it. anyways, i bled it back again and i got some clutch back again. but it is at the same point as before, i press the clutch and it squeels really loud and the clutch doesnt disengage completely. anyone kave any ideas as to why the clutch wont disengage or the squeel itself. the squeel is what makes me wonder, because normally if you half press a clutch it just slips, it doesnt squeel, as well, if the clutch was gone it would slip when i throttle the truck, which it doesnt. it pulls really hard still.
thanks in advance.