I need to figure out the steps on this procedure.....
Any links would be great....
well just incase someone else wants this done....... here it is
Im gonna hack 2 m4's up and make shorty pipes
one for undertail like this but shorter [img=http://img459.imageshack.us/img459/5961/suzukigsxr75093bikepics5381781.th.jpg]
also one like this...
seeking more pipes to hack up with rashs on them where i can cut and make a new looking shorty pipe
I just drilled out the rivets, removed the inner baffle and material, had the machine shop at work cut where i marked, then drilled new holes and rivetted it back up.
looks pimp now.. but im having some strap issues - no way to attach it to the stock hanger.
I'm considering leaving it strapless. THe pipe probably weighs less than 2lbs, and there is NO movement whatsoever.
I was thinking of chopping it and sticking it under the tail. I have this fetish making the pipe & can disappear on all the bikes i have or am getting in my possesion
this is my...boomstick!
Recommend against unsupported mufflers. Imagine a 2 pound sledge, held a little out from your body, by the handle end. Now jump off a 3 ft ledge. are you likely to be able to hold that sledge steady? It's the forces of suspension action that will work on it and break it off sooner or later.
I'm sure the machine shop guys might have an idea or two that might help...
Originally Posted by CrotchetyRocket
Not sure what you mean Recommend against unsupported mufflers.
I was welding up a new subframe with a new bracket for the dual m4 pipes? In the end it will be a way better support feature than any other bracket because it will be built by me
I could machine something but not really nec considering its never seen..
ahhhh figured it out somones going strapless in this thread