so i was doing a standup wheelie on my f4i .. scraped the 12 a bit and proceeded to go into wobbles.. i ended up losing it, bailing, and the bike rolled over, laying on its side, with the tank on the lower side, tires in the air
i got a ton of oil into the manifold and it was blowing smoke for a good 5 minutes at idle.
while letting it idle.. after 3-4 minutes, with the bike at 107 degrees, i revved it a bit (to maybe 5-6,000 rpm) and all of a sudden i hear a clattering, and then parts of my engine case start falling from the engine, pissing oil everywhere.
after inspecting the damage it appears that the front left side of the lower motor casing basically blew up leaving a hole about 3-4 inches in diameter at the seam that meets the bottom piece of the engine case.
anyone have any idea what happened?
any input would be appreciated..