Preload stuck
Results 1 to 3 of 3

Thread: Preload stuck

  1. #1
    Registered User Array jp_olan's Avatar
    Join Date
    May 2005
    Location
    richmond
    Bike
    2002 f4i

    Preload stuck

    My brother's 99 r6, problem with the preload. seems to get jammed with 5 lines showing. wont go any lower. Does anyone know what the problem is?

  2. Remove Advertisements
    BCSportBikes.com
    Advertisements
     

  3. #2
    Moderator Array TeeTee's Avatar
    Join Date
    Feb 2002
    Location
    Out to pasture in the 'Wack
    Bike
    04 Kawi Z1000,
    I'd say that it's stuck....

    Try a shot of WD40 and leave it for a few hours. That should free it up. Otherwise you need to take the cap off and clean and otherwise clean it up. Aluminium can corrode pretty bad from the elements and if some grit got stuck down the groove between the cap and adjuster things could get ugly.
    A backyard mechanic without a service manual is just like a hooker without a lamp pole.... they are both in the dark.

  4. #3
    Mmm...beer Array Stewy's Avatar
    Join Date
    Aug 2003
    Location
    Maple Ridge
    Bike
    2007 GSX-R750
    Turn to collar up to expose the bottom threads, inspect the threads for small rocks and debris. I've had similar issues with the coilovers on my car. Use a stiff bristle brush to clean the threads.
    "Nitrous is like a hot girl with STD’s… You know you want to hit it, but you’re afraid of the consequences"

    2007 Suzuki GSX-R 750
    2014 BMW X5 xDrive 35d M Sport
    2007 Audi A4 S-Line

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •