I've got a cbr f2 1994.
Last race at mission the bike began to stutter and jolt forward and back. as the day went on it got progressively worse and eventually came to the point that the bike would stall. I would take it back to the pits and start it up with no problem. Then, the next session out I started the bike with no problem, but as soon as i put it in gear it had extreme trouble moving. Eventually it stalled again.
I believe the issue is with the kickstand sensor. It is shutting the bike off when I put it in gear, due to a loose connection.
What I need:
I need you to correct me, if you believe I am wrong in the diagnosis. I also need to know where I should be looking to fix the problem. I found the junction box under the tank, where I believe the relay needs to be closed, but I'm not sure which plug of the five it is that is for the stand. Or, do racers generally cut back the wires for the sensor and connect them. If so, how do i tell what wires, as they would no longer be where they should be?
thanks in advance,