99 srad vs 02 gsxr nuts please answer
Results 1 to 5 of 5

Thread: 99 srad vs 02 gsxr nuts please answer

  1. #1
    RIP guthrie and lisa Array jacky's Avatar
    Join Date
    Dec 2006
    Location
    Banhammer canada
    Bike
    2006CBR600RR

    99 srad vs 02 gsxr nuts please answer

    In need of the first year of the FI on the srad models?
    The mock up of the engine and frame + fuel pump will it work within a 02 gsxr? Just questioning i have a 99 750 engine and am thinking about rebuilding it for use in the 02?

    But im wondeirng if i will need the wiring harness/ fuel pump and if it will work within the 02 frame?

    thanks for somebodies reply...
    Banhammer OlympicsBanhammer OlympicsBanhammer A million $ body and a food stamp face OlympicsBanhammer OlympicsBanhammer Olympics

  2. Remove Advertisements
    BCSportBikes.com
    Advertisements
     

  3. #2
    Eh Muh Gawd Becky!! Array Purplekawi's Avatar
    Join Date
    Jun 2003
    Location
    my front room
    Bike
    somethin somethin somethin
    might wanna hit up gixxer.com for you answer. i don't think you'd need to change the wiring but can't say for sure.
    That that doesn't kill us forces us to live with a busted up bike!!

  4. #3
    RIP guthrie and lisa Array jacky's Avatar
    Join Date
    Dec 2006
    Location
    Banhammer canada
    Bike
    2006CBR600RR
    im at gixxer.com now
    Banhammer OlympicsBanhammer OlympicsBanhammer A million $ body and a food stamp face OlympicsBanhammer OlympicsBanhammer Olympics

  5. #4
    Eh Muh Gawd Becky!! Array Purplekawi's Avatar
    Join Date
    Jun 2003
    Location
    my front room
    Bike
    somethin somethin somethin
    might take a little searching but look for motor swaps. that's how i found out how to swap a 1000 into my 600.
    That that doesn't kill us forces us to live with a busted up bike!!

  6. #5
    Registered User Array
    Join Date
    Feb 2006
    Location
    East Van
    Bike
    99 Srad750
    if U are using the 600 gastank you will need to use one of the drain outlets as a fuel return for the fuel not getting used by the injectors.

    What U need to do is remove the fuel pump stick your hand in to the tank and cut one of metal lines that carries the over flow from the gas cap to the spigots at the back of the tank.When youv'e done that U can use it as a fuel return
    The rest should be a bolt on if you have the wiring harness for the 750 engine I would use it.
    Mike

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •