Dyno in the lower mainland

nightstalker · Dec 28, 2006

Other then Graham,who else does custom mapping in the lower mainland tht anyone can recommend ? cheers

SpookyjacK · Dec 28, 2006

I think House of Speed next door to Fifth Gear is a certified Dynojet facility....

Stewy · Dec 29, 2006

SpookyjacK said:
I think House of Speed next door to Fifth Gear is a certified Dynojet facility....

Correct, Future Cycle has a Dynojet. A full dyno tune will you run $600 there, and will take about 8 hours or so to complete. They do mostly Harleys and choppers, I felt sort of outta place going there. :laughing

sparky · Dec 29, 2006

Modern has a dyno and should be able to help you with your gsxr.

SkydiveSonic · Dec 29, 2006

Single run is 45 bucks there. Full tune will run 90 bucks an hour. Asked a couple of weeks ago - and you feel SO out of place if you're on a sportsbike there :laughing

Focker · Dec 29, 2006

MAS Dyno has tuned quite a few bikes.

SpookyjacK · Dec 29, 2006

Stewy said:
Correct, Future Cycle has a Dynojet. A full dyno tune will you run $600 there, and will take about 8 hours or so to complete. They do mostly Harleys and choppers, I felt sort of outta place going there. :laughing

Ya I know but he is a certified by way of the Dynojet website.......

MartinRF900R · Dec 29, 2006

Trev Deeley on Boundary has a brand new Dynojet 250. don't know about the price they ask...
I'll ask Aaron at Modern how much he charges for fine tuning & dyno.

spinnin · Dec 29, 2006

Is it true that from the manufacture they set the bikes up to run fairly lean below around 6,000rpm to make governments happy with emissions?

Is that why a lot of people re-map they're stock ecu's?

Focker · Dec 30, 2006

Dyno tuning isn't where I would want to cheap out. If it were me I would go to Graham, MAS or Mike Valesco in the US.

MartinRF900R · Dec 30, 2006

spinnin said:
Is it true that from the manufacture they set the bikes up to run fairly lean below around 6,000rpm to make governments happy with emissions?

Is that why a lot of people re-map they're stock ecu's?

Makes sence....to passkiss emissions and also your tach is about 600-800 rpm lower than with the timing light! safety marging ( warranty). Also valid for cars.

Machinist · Dec 30, 2006

Dyno Tuneing.

Focker said:
Dyno tuning isn't where I would want to cheap out. If it were me I would go to Graham, MAS or Mike Valesco in the US.

I took My 954 to MIKE VALESCO in Bremmerton , And some of the Guy's I ride with Went there as well , He Charges $250.00 US It Takes around three Hours to do the Map and He Does an Excellent Job , He Uses a Dyno Jet And a Gas Analyiser. He Has a Real Pro set up in his Shop it is Clean and properly Vented . He specializes in Sport Bike And race bike Tuneing.
http://www.brotherspowersports.com/

nightstalker · Dec 31, 2006

thx for the replies guys..prob would be Graham or MAS, a buddy sent me Stage 1 map frm Crescent Suzuki in UK, my bike is set up basically similarly so want to upload it and then fine tune it re. atmospheric and local conditons

Stewy · Jan 2, 2007

nightstalker said:
thx for the replies guys..prob would be Graham or MAS, a buddy sent me Stage 1 map frm Crescent Suzuki in UK, my bike is set up basically similarly so want to upload it and then fine tune it re. atmospheric and local conditons

Even tweaking it for our conditions still will not give you the best map. Every bike is different. Even if you took two 600rr's, same mods, same year, same mileage, everything...the maps would be quite different. Using this map as a base is a good start. I am using, for now, a map off the Dynojet website, all last season I tweaked out the lean and rich spots the best I could. I'll be getting it on the dyno at some point before the season starts. Good luck with it!

getoffdagrid · Jan 13, 2007

here's an ad i saw on the buysell site. looks like a new shop in town, can't say i've heard of these guys.

~ HONDA SUZUKI KAWASAKI YAMAHA DYNOJET - DYNO TESTING SERVICES ~ Custom Cruisers ~ Sport Bikes ~ Dirt Bikes ~ ATVs ~ Watercraft RATES YOU CAN AFFORD Motorwork ~ Tune-ups ~ Tires ~ Parts ~ Plus full suspension work done by RACE TECH-CERTIFIED TECHNICIAN Ohlins shock sale on now! Winter storage also available. (South Surrey / Langley 194th Street)
Tel: 604-868-0676

Daniel Witt · Jan 20, 2007

getoffdagrid said:
here's an ad i saw on the buysell site. looks like a new shop in town, can't say i've heard of these guys.

~ HONDA SUZUKI KAWASAKI YAMAHA DYNOJET - DYNO TESTING SERVICES ~ Custom Cruisers ~ Sport Bikes ~ Dirt Bikes ~ ATVs ~ Watercraft RATES YOU CAN AFFORD Motorwork ~ Tune-ups ~ Tires ~ Parts ~ Plus full suspension work done by RACE TECH-CERTIFIED TECHNICIAN Ohlins shock sale on now! Winter storage also available. (South Surrey / Langley 194th Street)
Tel: 604-868-0676

Newman Racing Suspension 2921 194th St. Surrey, BC V3S-9V2 CANADA Murray Newman
Cell: (604) 868-0676
E-Mail: [email protected] ...
www.newmansuspension.com/

Dr. Thrillride · Feb 16, 2007

How do I get hold of Graham? Anyone have a number? sorry, I don't even have a last name.

Focker · Feb 16, 2007

Graham Buck, Valley Pro Dyno.

Dr. Thrillride · Feb 16, 2007

Focker said:
Graham Buck, Valley Pro Dyno.

Thanks!

Mike must be really busy, didn't get a chance to return my call...but Graham has run my bikes before, so I'll give him a shout.

Dr. Thrillride · Feb 16, 2007

Guess I won't, no number on vpr's website.

Ping...Graham Buck...

maybe these guys are still in hibernation

Dr. Thrillride said:
Thanks!

Mike must be really busy, didn't get a chance to return my call...but Graham has run my bikes before, so I'll give him a shout.

Dyno in the lower mainland

Top Contributors this Month