BC Sport Bikes Forum banner

High Idle 04 ninja 636

3560 Views 10 Replies 6 Participants Last post by  mr_brian
I just picked up an 04 ninja 636, idles around 2500 RPM, I'm thinking I can just adjust it down to 1500 ish. HOWEVER..... on this model it has a high idle adjustment for cold starts that seems to only move about a cm. Could this be the idle issue perhaps? Maybe a sticky cable? The adjuster lookes like a choke.
Thanks! :)
1 - 3 of 11 Posts
Idle adjust knob worked perfect! Thanks :)
Now I just need to solve this sticky
"fuel enrichment" tab that looks like a choke.
It feels like the cable is just stuck. I couldn't seem to find much on the Kawi board about it but ill post there too.
Thanks so much for all the input everyone! Off to Kawi Burnaby Tuesday to check out the fuel mileage and cable issue.
1 - 3 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.