BC Sport Bikes Forum banner

How to build a real stuntbike.

980 Views 6 Replies 5 Participants Last post by  OldSkewl
This is a salvage 2003 CBR F4i here are the mods:

1) 65 tooth rear sprocket

2) CBR 1000RR radial mount front end

3) CBR 1000RR clutch with modified rear slave acting as a hand brake

4) Raptor easy pull clutch lever

5) 60 series front Michelin Pilot Power

6)Cage built by 5thgear braced 360 degrees , held on in 4 main locations, replaceable end cap, Sleek design so you can still corner.

7) 5thgear 11 o.clock bar

8) Custom front cage for protecting guages and leg/hand hold support.

9) Some engine/suspension tuning that I'll never tell about.

10) Radiator brace so you don't rip the mounts.

11) Shorty exhaust pipe silencer, modified internals so it's still quiet.
See less See more
1 - 1 of 7 Posts
gauge cage is a good idea!.... rad brace = brilliant! I wish I did that...

bars gonna stay like that? swap and flip those clipons and put em above the triple and square them off a bit = best mod ever!!!!!
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.