BC Sport Bikes Forum banner
1 - 1 of 1 Posts

· Registered
468 Posts
Ummm .. if you got 2 ppl .. get someone to leverage the bike on its own kickstand .. that way you got the rear wheel off the ground. The 2nd person will then turn the rear wheel while spraying the lube on the chain? Somebody showed me to put the straw against certain areas on the sprocket to get the oil to the right places on the chain (ie .. on the ring seals).

I went out and bought a $20 pump style jackstand on wheels from walmart. You just position it on the right side of the bike under your engine? There should be a spot that is solid metal .. then you just jack it up so that the rear wheel is 1" off the ground. Then you turn the wheel and spray lube.

NEVER try leaving the engine on in gear to lube the chain. It is dangerous =)
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.