BC Sport Bikes Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
220 Posts
Discussion Starter · #1 ·
hey, im putting a bike together possibley for the track. might even sell it but my question is, are most rims interchangable for honda sportbikes. im putting together an 04 cbr 600rr and i have everything except subrame and rear rim. can i use a later model F3 or F4 rim. might make it easier to find parts instead of waiting for a single rim to pop up. thanks.
 

·
back on the street
Joined
·
1,832 Posts
no but you can use any RR rim, the F4/F4i use a smaller axle/bearing set-up than the RR
 

·
Registered
Joined
·
220 Posts
Discussion Starter · #6 ·
i might just do that. just wanted to know if it was possible to swap if i found a good deal. i'll give u a call... lots of rims but no oilpans, haha. just kidding
 

·
back on the street
Joined
·
1,832 Posts
thanks. good to know, i might just us a 1000rr rear rim.
If you go 100RR, not that I recommend it because it will change the way the bike handles, but if you do make sure you get the spacers, or better yet, get everything that goes between the swingarm just to make sure that you have all the right clearances....

If it were me, I would just go to Turbosonoma (Brad/ Chop Shop Cycle) and get the right stuff, I know he had at least 2 600RR there last time I was out that way........
 

·
Registered
Joined
·
220 Posts
Discussion Starter · #9 ·
yeah it's me. no worries, odds are i was going to use a 600rr rim, im in no rush just wanted to know what other options i had if i couldnt get a rim.thanks for the help guys. i will give brad a call. i wouldnt do anything with out doing my homework first...thanks again
 
1 - 9 of 9 Posts
Top