BC Sport Bikes Forum banner
1 - 20 of 33 Posts

·
Registered
Joined
·
4,209 Posts
Discussion Starter · #1 ·
What can you get for a $150 today ?


how about a Yosh RS-3 titanium oval pipe ? - used ofcourse but that's just what I picked up at Burnaby Kawasaki when Bruce and I went there to ask a couple of questions....


I have ordered the mounting bracket nd will be in on Wednesday, will post pictures then, the entire bike should be ready by then too...


Bruce did a fantastic job in fixing my front flushmounts....you guys should check out his garage....man he could build a hydrogen bomb in there if he wanted....:D:D Thanks Bruce....


so tomorrow I will finish the other side ofr the front upper fairing, install the PIAA lights gifted to me by a very generous Ryan - who is also pretty much doing my tail integrator thingy and teaching me the basics in electronics....:D:D:D:D


so hopefully by Monday evening the bike will be ready to roll and the yosh pipe will be on by Wednesday.....yahoooooooooo



overall a very good day.....
 
G

·
good to hear... $50 for a YOsh Tri-Oval... u lucky bastard!! :flip its good to hear that there's still good deals out there. good stuff.
 

·
resident monkey boy
Joined
·
806 Posts
OH MY GOD!!!! Mr. Kawasaki isn't putting a Muzzy on his bike!!!!:laughing

Lucky guy you, makes my want to order the Akro sooner
 

·
Super Moderator
Joined
·
5,114 Posts
what ever happened to the stock dyno shootout between us? You fearing the gixxer power aren't ya?? Have to put a pipe on to even up the odds eh?? :D :laughing :laughing
 

·
Premium Member
Joined
·
7,666 Posts
Hey, I saw that pipe hanging from the roof downstairs when I went to BK earlier today! So you're the bastard that picked it up.:mad ;) It has a little scuff on the Yoshi emblam, right? but otherise okay? I was considering buying it myself...I bought a stainless steel RS-3 oval (only $100 new!) when I bought my 6R from there a few weeks ago, but I haven't installed it yet. :rolleyes I was thinking of just returning the stianless one in exchange for that Ti one, but I forgot about it by the time I left.

Congrats on your new purchase.
 

·
Registered
Joined
·
4,209 Posts
Discussion Starter · #8 ·
Muzzy ? Kawasaki's ussually race with Hindle......only the drag racing and the 12r projects are muzzy...

no CG, I will put the stock back on for ya....it's no compeition, you will beat me in the top end, I will beat you in the lower and middle and my torque wil make your seems like needing a powerade.....:D:D:D:D - p.s. have also checked that this will be the result....


and even if I don't but the stock can back on (as I might be getting it rejetted) then I am sure there will be a stock 6R coming


get a good comparision


Ryan's - Kerker
Mine - Yosh RS-3
Bluestone's ? - stock ?
 

·
Super Moderator
Joined
·
5,114 Posts
Human said:
no CG, I will put the stock back on for ya....it's no compeition, you will beat me in the top end, I will beat you in the lower and middle and my torque wil make your seems like needing a powerade.....:D:D:D:D - p.s. have also checked that this will be the result....


and even if I don't but the stock can back on (as I might be getting it rejetted) then I am sure there will be a stock 6R coming


get a good comparision


Ryan's - Kerker
Mine - Yosh RS-3
Bluestone's ? - stock ?
I keep on hearing about this class leading kawi torque, but have yet to see it :) especially with Bluestone trying to get the front wheel up :laughing :laughing joking joking.... But still, I have yet to see a 6r dyno that had more torque or power from 8k and up on the new gixxers.... i'm calling your bluff, show me the proof :) :D :p
 

·
Registered
Joined
·
4,209 Posts
Discussion Starter · #10 ·
Canadian_Gixxer said:


I keep on hearing about this class leading kawi torque, but have yet to see it :) especially with Bluestone trying to get the front wheel up :laughing :laughing joking joking.... But still, I have yet to see a 6r dyno that had more torque or power from 8k and up on the new gixxers.... i'm calling your bluff, show me the proof :) :D :p

ok, then how about a off the line holeshot challenge ? I have already beaten an F4i...only got a GSXR600 and an R6 to go....
 

·
Super Moderator
Joined
·
5,114 Posts
Human said:



ok, then how about a off the line holeshot challenge ? I have already beaten an F4i...only got a GSXR600 and an R6 to go....
sounds good, lets go :) though it might not be as fair, I weigh alot less than you, so you might want to get a ringer rider for your bike :) :) :D :D

in fact, come out to mission with me and jonathan this year, we'll be duking it out on the 1/4 strip.... it'll be lots of fun.... :)
 
G

·
Ahhh you have got to be joking me, that is exactly what I want. I was about to go out there too and check if they had any used pipes. You are a lucky bastard!
 

·
Registered
Joined
·
4,209 Posts
Discussion Starter · #13 ·
ummm, never even thought about that.....well we will see....screw mission....Delta superport way....for pink slips baby....lol (not saying what kind of pink slips :p)



Canadian_Gixxer said:


sounds good, lets go :) though it might not be as fair, I weigh alot less than you, so you might want to get a ringer rider for your bike :) :) :D :D

in fact, come out to mission with me and jonathan this year, we'll be duking it out on the 1/4 strip.... it'll be lots of fun.... :)
 
G

·
That's SWEET!! I didn't know dealers like Burnaby Kawasaki dealt with used parts. Any tips on where to get a used slip-on for my Gixxer?
 

·
Super Moderator
Joined
·
5,114 Posts
Human said:
ummm, never even thought about that.....well we will see....screw mission....Delta superport way....for pink slips baby....lol (not saying what kind of pink slips :p)

how about we race against our own bikes as well, you on mine, me on yours :)
 

·
Registered
Joined
·
4,209 Posts
Discussion Starter · #16 ·
Canadian_Gixxer said:


how about we race against our own bikes as well, you on mine, me on yours :)

umm.....not comfy with that....don't have the $$$ if I mess up your bike....plus I am sure Adam/Jim etc... wil be taking pictures and movies like mad....of just me riding a suz.....lol
 

·
Super Moderator
Joined
·
5,114 Posts
Human said:
plus I am sure Adam/Jim etc... wil be taking pictures and movies like mad....of just me riding a suz.....lol
damn, that was my plan all along :) :) what will it take to get you to ride another brand, or even sit on one :) :laughing
 

·
Registered
Joined
·
4,209 Posts
Discussion Starter · #18 ·
heck I will sit on yours, even ride bitch on yours, I don't have anything against the other brands, it's just that most of you all, no names, keep beating up the Kawi. for no reason....so I have decided to be the Kawi defender....

but heck I would ride your, take it for a short ride, wouldn't mind you doing the same to mine.....but doing a holeshot challenge or wheelies and stuff....the possiblities of something going wrong on a bike not setup for me or another rider could be a big mistake....but if you just want to take mine out for a reg. road ride that's fine with me....just no wheelies....stoppies, or anything aggressive...lol :D see what I am saying ?
 

·
Super Moderator
Joined
·
5,114 Posts
dont worry dude, I wouldn't dare to wheelie or run hard anybody elses bike, unless they told me to....
 
G

·
THe motorcycle division forms a relatively small part of Kawasaki Heavy Industries, a vast firm that produces trains, boats, and planes. People like to rag on Kawi because they know its the best bike company. In 1990 the zzr1100 made 145 horsepower and 175 mph top speed. This was the fastest production streetbike 5 years later too. And now the fastest production bike is the zx12r. 2001 amasupersport champion, Eric Bostrom, and what does he ride, yes a zx6r. 2001 world supersport champion, Andrew Pitt, also zx6r. The zx7r has not been changed since "96 and is still winning races. So everyone else can get on there knees and commence the blowing.
 
1 - 20 of 33 Posts
Top